ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 135)

P-2608HWL-Dx Series User’s Guide
Chapter 9 Wireless LAN 135
9.8 QoS Screen
The QoS screen by default allows you to automatically give a service a priority level.
Click Network > Wireless LAN > QoS. The following screen displays.
Wireless LAN: QoS
The following table describes the fields in this screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 42 MAC Address Filter
LABEL DESCRIPTION
Table 43 Wireless LAN: QoS
LABEL DESCRIPTION
QoS
Enable WMM QoS Select the check box to enable WMM QoS on the ZyXEL Device.
WMM QoS Policy Select Default to have the ZyXEL Device automatically give a service a
priority level according to the ToS value in the IP header of packets it sends.
Select Application Priority from the drop-down list box to display a table of
application names, services, ports and priorities to which you want to apply
WMM QoS.
This table only appears if you select Application Priority in WMM QoS
Policy.
# This is the number of an individual application entry.