beautypg.com

2 sip alg, Table 51 edit address mapping rule – ZyXEL Communications P-2608HWL-Dx Series User Manual

Page 149

background image

P-2608HWL-Dx Series User’s Guide

Chapter 10 Network Address Translation (NAT) Screens

149

The following table describes the fields in this screen.

10.6.2 SIP ALG

Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows
SIP calls to pass through NAT by examining and translating IP addresses embedded in the
data stream. When the ZyXEL Device registers with the SIP register server, the SIP ALG
translates the ZyXEL Device’s private IP address inside the SIP data stream to a public IP
address. You do not need to use STUN or an outbound proxy if your ZyXEL Device is behind
a SIP ALG.

Use this screen to enable and disable the SIP (VoIP) ALG in the ZyXEL Device. To access
this screen, click Network > NAT > ALG.

Table 51 Edit Address Mapping Rule

LABEL

DESCRIPTION

Type

Choose the port mapping type from one of the following.

One-to-One: One-to-One mode maps one local IP address to one global IP

address. Note that port numbers do not change for One-to-one NAT mapping

type.

Many-to-One: Many-to-One mode maps multiple local IP addresses to one

global IP address. This is equivalent to SUA (i.e., PAT, port address translation),

ZyXEL's Single User Account feature that previous ZyXEL routers supported

only.

Many-to-Many Overload: Many-to-Many Overload mode maps multiple local IP

addresses to shared global IP addresses.

Many-to-Many No Overload: Many-to-Many No Overload mode maps each

local IP address to unique global IP addresses.

Server: This type allows you to specify inside servers of different services behind

the NAT to be accessible to the outside world.

Local Start IP

This is the starting local IP address (ILA). Local IP addresses are N/A for Server port

mapping.

Local End IP

This is the end local IP address (ILA). If your rule is for all local IP addresses, then

enter 0.0.0.0 as the Local Start IP address and 255.255.255.255 as the Local End

IP address.
This field is N/A for One-to-One and Server mapping types.

Global Start IP

This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic

IP address from your ISP.

Global End IP

This is the ending global IP address (IGA). This field is N/A for One-to-One, Many-

to-One and Server mapping types.

Server Mapping

Set

Only available when Type is set to Server.
Select a number from the drop-down menu to choose a server mapping set.

Edit Details

Click this link to go to the Port Forwarding screen to edit a server mapping set that

you have selected in the Server Mapping Set field.

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.