beautypg.com

4 group ring screen – ZyXEL Communications P-2608HWL-Dx Series User Manual

Page 181

background image

P-2608HWL-Dx Series User’s Guide

Chapter 13 Phone Book

181

13.4 Group Ring Screen

This screen lets you specify ring types for calls from particular numbers. The ring types vary
by ring duration and stop ring duration. Any standard phone is compatible with this feature.

When an incoming call comes in, the ZyXEL Device checks if it is from any of the phone
numbers you set up in this screen. If the number matches an enabled entry, the ZyXEL Device
sends the corresponding ring to your phone. You can also configure different rings for calls
coming into various SIP accounts, coming into the PSTN line and internal calls.

To access this screen, click VoIP > Phone Book > Group Ring.

Advanced Setup

The ZyXEL Device checks these rules before it checks the rules in the Forward to

Number section.

#

This field is a sequential value, and it is not associated with a specific rule. The

sequence is important, however. The ZyXEL Device checks each rule in order, and

it only follows the first one that applies.

Activate

Select this to enable this rule. Clear this to disable this rule.

Incoming Call

Number

Enter the phone number to which this rule applies.

Forward to

Number

Enter the phone number to which you want to forward incoming calls from the

Incoming Call Number. You may leave this field blank, depending on the

Condition.

Condition

Select the situations in which you want to forward incoming calls from the

Incoming Call Number, or select an alternative action.
Unconditional - The ZyXEL Device immediately forwards any calls from the

Incoming Call Number to the Forward to Number.
Busy - The ZyXEL Device forwards any calls from the Incoming Call Number to

the Forward to Number when your SIP account already has a call connected.
No Answer - The ZyXEL Device forwards any calls from the Incoming Call

Number to the Forward to Number when the call is unanswered. (See No

Answer Waiting Time.)
Block - The ZyXEL Device rejects calls from the Incoming Call Number.
Accept - The ZyXEL Device allows calls from the Incoming Call Number. You

might create a rule with this condition if you do not want incoming calls from

someone to be forwarded by rules in the Forward to Number section.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 65 Phone Book > Incoming Call Policy

LABEL

DESCRIPTION