ZyXEL Communications P-2608HWL-Dx Series - Manual (Page 134)

P-2608HWL-Dx Series User’s Guide
134 Chapter 9 Wireless LAN
9.7 MAC Filter
To change your ZyXEL Device’s MAC filter settings, click Network > Wireless LAN >
MAC Filter. The screen appears as shown.
Figure 73 MAC Address Filter
The following table describes the labels in this menu.
Table 42 MAC Address Filter
LABEL DESCRIPTION
Active MAC
Filter
Select the check box to enable MAC address filtering.
Filter Action
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
Set This is the index number of the MAC address.
MAC Address Enter the MAC addresses of the wireless station that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.