ZyXEL Communications GS-4024 - Manual (Page 400)

Chapter 48 Interface Commands
GS-4012F/4024 User’s Guide
400
• Set the outgoing traffic ports as the CPU (0), seven (7) and eight (8).
48.2.11 qos priority
Syntax:
qos priority <0 .. 7>
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
48.2.12 name
Syntax:
name
where
An example is shown next.
• Enable port one for configuration.
• Set a name for the port.
48.2.13 speed-duplex
Syntax:
speed-duplex
sysname(config)# vlan-type port-based
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# egress set 0,7,8
<0 .. 7> = Sets the quality of service priority for a port.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# qos priority 4
= Sets a name for your port interface.
sysname(config)# interface port-channel 1
sysname(config-interface)# name Test