ZyXEL Communications GS-4024 - Manual (Page 375)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
375
45.12.6 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 142 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan Creates a new VLAN group. 13
exit Leaves the VLAN configuration
mode. 13
fixed Specifies the port(s) to be a
permanent member of this
VLAN group. 13
forbidden
list>
Specifies the port(s) you want to
prohibit from joining this VLAN
group. 13
help Displays a list of available VLAN
commands. 13
inactive Disables the specified VLAN. 13
ip address Sets the IP address of the
Switch in the VLAN. 13
manageable
Sets the IP address of the
Switch in the VLAN and allow
remote management to this IP
address. 13
default-gateway
address>
Sets the default gateway IP
address in this VLAN. 13
name Specifies a name for
identification purposes. 13
no fixed Sets fixed port(s) to normal
port(s). 13
forbidden
list>
Sets forbidden port(s) to normal
port(s). 13
inactive Enables the specified VLAN. 13
ip address
address>
Deletes the IP address and
subnet mask from this VLAN. 13
ip address default-
gateway
Deletes the default gateway
from this VLAN. 13
untagged Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN
Group ID. 13
normal
list>
Specifies the port(s) to
dynamically join this VLAN
group using GVRP 13
untagged
list>
Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN
Group ID. 13