ZyXEL Communications GS-4024 - Manual (Page 362)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
362
area
virtual-link
message-digest-
key md5
Enables MD5 authentication and
sets the key ID and key for the
virtual link in the area. 13
area
virtual-link
name
Sets a descriptive name for the
virtual link for identification
purposes. 13
exit Leaves the router OSPF
configuration mode. 13
network
addr/bits> area
Creates an OSPF area. 13
no area
id>
Removes the specified area. 13
no area
id>
authentication
Sets the area to use no
authentication (None). 13
no area
id> default-
cost
Sets the area to use the default
cost (15). 13
no area
id> stub
Disables stub network settings in
the area. 13
no area
id> stub no-
summary
Sets the area to send LSAs (Link
State Advertisements). 13
no area
id> virtual-
link
id>
authentication-
key
Resets the authentication
settings on this virtual link. 13
no area
id> virtual-
link
id> message-
digest-key
Resets the authentication
settings on this virtual link. 13
no area
id> virtual-
link
id>
authentication-
same-as-area
Resets the authentication
settings on this virtual area. 13
no area
id> virtual-
link
id>
Deletes the virtual link from the
area. 13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE