ZyXEL Communications GS-4024 User Manual
Page 372
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
372
ingress-check
Disables ingress checking on the
port(s).
13
intrusion-lock
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected the
cable.
13
ipmc egress-
untag-vlan id> Disables the port(s) from 13 loopguard Disables the loop guard feature 13 mac- authentication Disables MAC authentication via 13 mirror Disables port mirroring on the 13 multicast-limit Disables multicast limit on the 13 trtcm Disables 2-rate 3-color marking 13 vlan-trunking Disables VLAN trunking on the 13 pvid The default PVID is VLAN 1 for all 13 qos priority <0 .. 7> Sets the quality of service priority 13 speed-duplex full|100- half|100- full|1000-full> Sets the duplex mode ( half or full ) and speed ( 10 , 100 or 1000 Mbps) of the connection on the interface. Selecting auto (auto-negotiation) makes one port 13 spq Sets the port(s) to use Strict 13 trtcm Enables Two Rate Three Color 13 cir Sets the Commit Information Rate 13 pir Sets the Peak Information Rate 13 dscp green <0-63> DSCP value to use for packets 13 dscp yellow <0- 63> DSCP value to use for packets 13 dscp red <0-63> DSCP value to use for packets 13 Table 140 interface port-channel Commands (continued) COMMAND DESCRIPTION PRIVILEGE
removing specified VLAN tag from
IP multicasting packets before
forwarding.
on the port(s).
a RADIUS server on the port(s).
port(s).
port(s).
on the port(s).
port(s).
ports. Sets a PVID in the range 1
to 4094 for the specified interface.
for an interface.
able to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
Priority Queuing.
Marker on the port(s).
on the port(s).
on the port(s).
with low packet loss priority.
with medium packet loss priority.
with high packet loss priority.