ZyXEL Communications GS-4024 - Manual (Page 338)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
338
ethernet oam summary Displays the configuration details
of each OAM activated port. 3
garp Displays GARP information. 3
hardware-monitor Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F). 0
https Displays the HTTPS information. 3
certificate Displays the HTTPS certificates. 3
key Displays the HTTPS key. 3
session Displays current HTTPS
session(s). 3
timeout Displays the HTTPS session
timeout. 3
igmp-filtering profile Displays IGMP filtering profile
settings. 3
igmp-snooping Displays global IGMP snooping
settings. 3
vlan Displays the VLANs on which
IGMP snooping is enabled. 3
querier Displays the IGMP querier mode
settings on each port. 3
interfaces
number>
Displays current interface status. 3
interfaces config Displays current interface
configuration. 3
bandwidth-control Displays bandwidth control
settings. 3
bstorm-control Displays broadcast storm control
settings. 3
egress Displays outgoing port
information. 3
igmp-filtering Displays IGMP filtering settings. 3
igmp-group-
limited
Displays the IGMP group limit. 3
igmp-immediate-
leave
Displays the IGMP Immediate
Leave setting. 3
igmp-query-mode Displays the IGMP query mode for
the specified port(s). 3
ip Displays IP related information. 0
arp Displays the ARP table. 3
dvmrp group Displays DVMRP group
information. 3
dvmrp interface Displays DVMRP interface
information. 3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE