ZyXEL Communications GS-4024 User Manual
Page 360
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
360
port-
security
Enables port security on the
device.
13
Enables port security on the
specified port(s).
13
learn inactive
Disables MAC address learning
on the specified port(s).
13
address-limit
Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
13
MAC-freeze
Adds learned MAC addresses to
the static MAC table and stops
learning any more MAC
addresses.
13
queue
priority <0-7>
level <0-7>
Sets the priority level-to-physical
queue mapping.
13
radius-
accounting
host
Specifies the IP address of
RADIUS accounting server 1 or
RADIUS accounting server 2
(index =1 or index =2).
13
[acct-port
number>] [key Sets the port number and key of 13 timeout <1-1000> Specifies the RADIUS 13 radius- server host Specifies the IP address of 13 [auth-port number>] [key Sets the port number and key of 13 timeout <1-1000> Specifies the RADIUS server 13 mode priority|round- robin> Specifies the mode for RADIUS 13 remote- management service icmp|snmp> Specifies a group of trusted 13 router dvmrp Enables and enters the DVMRP 13 exit Leaves the DVMRP 13 threshold value> Sets the DVMRP threshold 13 Table 139 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEGE
the external RADIUS accounting
server.
accounting server timeout value.
RADIUS server 1 or RADIUS
server 2 (index =1 or index =2).
the external RADIUS server.
timeout value.
server selection.
computer(s) from which an
administrator may use a service
to manage the Switch.
configuration mode.
configuration mode.
value.