ZyXEL Communications GS-4024 User Manual
Page 347

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
347
helper-address
server1> [ server2>] [ server3>] Sets the IP addresses of up to 3 13 information Allows the Switch to add system 13 option Allows the Switch to add DHCP 13 dhcp snooping Enables DHCP Snooping on the 13 database filename> Specifies the location of the tftp://{domain name or IP address}/directory, if applicable/ ; for example, tftp:// 192.168.10.1/database.txt . 13 database timeout Specifies how long (10-65535 13 database write- delay Specifies how long (10-65535 13 vlan list> Specifies the VLAN IDs for 13 vlan list> information Sets the Switch to add the 13 vlan list> option Sets the Switch to add the slot 13 diffserv Enables DiffServ. 13 dscp <0-63> priority <0-7> Sets the DSCP-to-IEEE 802.1q 13 ethernet oam Enables Ethernet OAM on the 13 exit Exits from the CLI. 13 garp join <100-65535> leave leaveall Configures GARP time settings. 13 Table 139 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEGE
DHCP servers.
name to agent information.
relay agent information.
Switch.
DHCP snooping database. The
location should be expressed like
this:
file name
seconds) the Switch tries to
complete a specific update in the
DHCP snooping database before
it gives up.
seconds) the Switch waits to
update the DHCP snooping
database the first time the
current bindings change after an
update.
VLANs you want to enable
DHCP snooping on.
system name to DHCP requests
that it broadcasts to the DHCP
VLAN, if specified, or VLAN.
number, port number and VLAN
ID to DHCP requests that it
broadcasts to the DHCP VLAN, if
specified, or VLAN.
mappings.
Switch.