ZyXEL Communications GS-4024 - Manual (Page 349)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
349
default-gateway Sets the default gateway’s IP
address for the out-of-band
management port. 13
name-server Sets the IP address of a domain
name server. 13
route Creates a static route. 13
[metric
] [name
]
[inactive]
Sets the metric of a static route
or deactivates a static route. 13
source binding
vlan
Creates a static binding for
DHCP snooping and ARP
inspection. 13
interface port-
channel
Specifies the port(s) for this static
binding. 13
lacp Enables Link Aggregation
Control Protocol (LACP). 13
system-priority <1-65535> Sets the priority of an active port
using LACP. 13
logins username
password
Configures up to four read-only
login accounts. 14
username privilege <0-
14>
Assigns a privilege level to user
accounts. 14
logout Exits from the CLI. 0
loopguard Enables loopguard on the
Switch. 13
mac-
authenticat
ion
Enables MAC authentication on
the Switch. 13
nameprefix
string>
Sets the prefix appended to the
MAC address before it is sent to
the RADIUS server for
authentication. 13
password
string>
Sets the password sent to the
RADIUS server for clients using
MAC authentication. 13
timeout <1-3000> Specifies the amount of time
before the Switch allows a client
MAC address that fails
authentication to try and
authenticate again.
This settings is superseded by
the
mac-aging-time
command.
13
mac-aging-
time
<10-3000> Sets learned MAC aging time. 13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE