ZyXEL Communications GS-4024 User Manual
Page 371
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
371
name string> Sets a name for the port(s). Enter 13 no arp inspection trust Disables this port from being a 13 arp inspection limit Resets the ARP inspection rate to 13 bandwidth-limit Disables bandwidth limit on the 13 bandwidth-limit Disables cir bandwidth limits on 13 bandwidth-limit Disables pir bandwidth limits on 13 bandwidth-limit Disables egress bandwidth limits 13 broadcast-limit Disables broadcast storm control 13 dhcp snooping trust Disables this port from being a 13 dhcp snooping limit rate Resets the DHCP snooping rate 13 diffserv Disables DiffServ on the port(s). 13 dlf-limit Disables destination lookup failure 13 egress-set list> Disables the egress port setting. 13 ethernet oam Disables Ethernet OAM on the 13 ethernet oam mode Resets Ethernet OAM mode to 13 ethernet oam remote-loopback supported Disables Ethernet OAM remote 13 flow-control Disables flow control on the 13 ge-spq Disables strict priority queuing on 13 gvrp Disable GVRP on the port(s). 13 igmp-filtering profile Disables IGMP filtering. 13 igmp-group-limit Disables IGMP group limitation. 13 igmp-immediate- leave Disables the IGMP immidiate 13 inactive Enables the port(s) on the Switch. 13 Table 140 interface port-channel Commands (continued) COMMAND DESCRIPTION PRIVILEGE
a descriptive name (up to nine
printable ASCII characters).
trusted port for ARP inspection.
the default (0).
port(s).
the port(s).
the port(s).
on the port(s).
limit on the port(s).
trusted port for DHCP snooping.
to the default (0).
(DLF) on the Switch.
port(s).
the default setting (active) on the
ports.
loop-back capability on the
port(s).
port(s).
the Gigabit ports.
leave function.