ZyXEL Communications GS-4024 User Manual
Page 348
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
348
help
Displays help information.
0
history
Displays a list of previous
command(s) that you have
executed.
0
hostname
Sets the Switch’s name for
identification purposes.
13
https
cert-regeneration
Re-generates a certificate.
13
timeout <0-65535>
Sets the HTTPS timeout period.
13
igmp-
filtering
Enables IGMP filtering on the
Switch.
13
profile
start-address
end-address
Sets the range of multicast
address(es) in a profile.
13
igmp-
snooping
Enables IGMP snooping.
13
8021p-priority
<0-7>
Sets the 802.1p priority for
outgoing igmp snooping packets.
13
host-timeout
<1-16711450>
Sets the host timeout value.
13
leave-timeout
<1-16711450>
Sets the leave timeout value
13
unknown-multicast-
frame
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
Sets how to treat traffic
belonging to reserved multicast
groups.
13
vlan
Specifies which VLANs to
perform IGMP snooping on.
13
Allows you to set a name for a
multicast VLAN.
13
mode
Specifies whether the Switch
should automatically learn the
first 16 VLAN’s that send
multicast traffic via the Switch
(auto) or whether the Switch will
only perform IGMP snooping on
the VLANs configured on the
Switch.
13
interface
port-channel
Enables a port or a list of ports
for configuration. See
for more
details.
13
route-domain address>/ bits> Enables a routing domain for for more details. 13 ip address Sets the IP address and subnet 13 Table 139 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEGE
configuration. See
mask of the out-of-band
management port.