Xerox COPYCENTRE M20I - Manual (Page 74)

Page 4-4 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Pa
pe
r an
d
Ot
he
r M
ed
ia
z When printing
from your PC,
ensure you select
the Paper Source
and the correct
paper size from
your software
application.
)
Use the instructions “Setting the Paper Size” on page 4-8 to set the correct size for the Paper
Tray.
5
Corner
snubbers
¾ Ensure that the paper is
positioned under the snubbers.
¾ Do not fill above the Maximum Fill
Line.
Max Fill
Line
6
¾ Position the side guide by
squeezing the lever and sliding it
toward the stack of paper, until it
gently touches the side of the
stack.
Do not allow the guide to press
against the edge of the paper
tightly.
¾ Close the Paper Tray.