Xerox COPYCENTRE M20I - Manual (Page 103)

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 6-7
Fax
Manual group dialing
z Use to manually program a broadcast
send to multiple destinations.
¾ Load the originals and select [Fax].
¾ Press [Manual Group].
The display requests a destination fax number.
¾ Enter the first fax number and press [Enter].
¾ ’Another No.?’ displays. Select [Yes] to add another number
and press [Enter].
¾ Repeat the procedure until all numbers have been entered.
Then select [No] and press [Enter].
The originals are scanned and faxed to the destinations
entered.
Manual Dialing
z Use to dial the fax number with the
telephone line open.
¾ Load the originals and select [Fax].
¾ Press [Manual Dial].
The dial tone is audible and the LCD displays ’Phone’.
¾ Dial the fax number. When the fax tone is heard, press [Start] to
begin faxing.
Redial
z Numbers which have already been
entered recently can be quickly
accessed using the Redial function.
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial].
The last number is automatically dialled and the originals are
scanned and faxed.
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial] for approximately 2 seconds.
The Redial Memory in the machine retains the last 10 numbers
dialled.
¾ Using the Navigation Keys, select the number required and
press [Enter].
¾ Press [Start] to dial the number. The fax is automatically
scanned and sent.