Xerox COPYCENTRE M20I - Manual (Page 158)

Page 9-18 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Machin
e Admin
istr
a
tion
Managing Departments
This setting is used to enable or disable Department Mode and to clear Department data and
codes.
1
¾ Press the [Machine Status] key.
2
¾ Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
¾ If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Select [Department] using the
Navigation Keys is displayed and
press [Enter].
¾ Enter the Master Access Code.
)
The first time that you access
Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
System Admin Tools
[Department]
4
¾ Select [Management] using the
Navigation Keys and press
[Enter].
Department
[Management]