Enter the quantity, Press start – Xerox COPYCENTRE M20I User Manual
Page 57
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Page 3-5
Co
py
Enter the Quantity
z
The maximum
copy quantity is
999.
z
You can cancel a
copy job while it is
copying by
pressing the
[Stop] key twice.
Press Start
5
Numeric Keypad
Clear/Clear All
¾
Use the Numeric Keypad to enter
the number of copies required.
¾
If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
6
¾
Press [Start] to begin the copy
job.
¾
If Collated is On, when the
document is fed from the
Document Glass, the display
shows [Scan Another?].
¾
To scan another original, load the
next original and using the
Navigation Keys select [Yes] and
press [Enter].
Continue the procedure until all
the originals have been scanned.
¾
Select [No] when all the originals
have been scanned, and press
[Enter].
Printing commences and copies
are delivered to the Output Tray.
Navigation Keys
Start