Xerox COPYCENTRE M20I - Manual (Page 117)

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 6-21
Fax
Speed Dials New ¾ Enter a speed dial number using the Numeric
Keypad and then press [Enter].
If a number is already stored in the location a
message displays. Enter a different Speed
Dial number.
¾ Enter the fax number you want to store using
the Numeric Keypad and press [Enter].
To insert a pause press the [Pause/Redial]
key and a ’P’ appears on the display.
¾ To assign a name, enter the required name
using the Numeric Keypad. If you do not
require a name leave empty and press
[Enter].
To store more Speed Dial numbers repeat
the procedure.
Edit ¾ If you want to delete a specific Speed Dial
number from the group, press the [Speed
Dial] key and enter the number. The display
shows [Delete].
To add a new number, press the [Speed Dial]
key and enter the number, the display shows
[Add].
¾ Press [Enter]. Repeat the procedure until all
the editing has been completed.
¾ Press the [Menu/Exit] key when you have
finished editing. The name appears in the
upper line of the display. Change the name
if required and press [Enter].
Delete