Xerox COPYCENTRE M20I - Manual (Page 174)

Page 10-2 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Ma
in
te
na
nc
e Cleaning
Cleaning the Document Glass and Constant Velocity Transport
(CVT) Glass
Keeping the Document Glass clean helps ensure the best possible output. It is recommended
that the Document Glass is cleaned at the start of each day and during the day as needed.
The Constant Velocity Transport (CVT) glass is the strip of glass located to the left of the
Document Glass and is used to scan originals fed through the Document Feeder. The CVT
glass also requires cleaning.
CAUTION: DO NOT use organic or strong chemical solvents or aerosol cleaners or
pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of
children.
WARNING: DO NOT remove the covers or guards that are fastened with screws or
attempt any maintenance procedure that is not specifically described in this
documentation.
¾ Slightly dampen a soft lint-free
cloth or paper towel with water.
¾ Open the Document Feeder.
¾ Wipe the surface of the
Document Glass and CVT Glass
until they are clean and dry.
¾ Wipe the underside of the
Document Feeder until it is clean
and dry.
¾ Close the Document Feeder.
CVT Glass