Xerox COPYCENTRE M20I - Manual (Page 41)

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-17
Gett
ing St
arted
z When printing
from your PC,
ensure you select
the Paper Source
and the correct
paper size from
your software
application.
)
Refer to “Machine Setup” starting on page 2-19 to set the correct size for the Paper Tray.
For more detailed information about Paper Supply, refer to the Chapter “Paper and Other Media”
starting on page 4-1.
6
¾ Position the side guide by
squeezing the lever and sliding it
toward the stack of paper, until it
gently touches the side of the
stack.
Do not allow the guide to press
against the edge of the paper
tightly.
¾ Close the Paper Tray.