Xerox COPYCENTRE M20I - Manual (Page 46)

Page 2-22 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
G
ett
ing St
arted
USB Mode Fast Use to set the USB speed. Fast is
the default mode. Some PC users
may experience poor USB
implementation in the default
mode. If this occurs, select the
SLOW mode in order to achieve
successful results.
Slow
Device Name Fax Use to enter the fax number and
name of the machine.
ID
Date & Time Enter the current date and time
using the numeric keypad. Use
Clock Mode to set whether the
machine uses a 12 or 24 hour
clock.
Clock Mode 12 hour The machine can be configured to
display time using either a 12-hour
or 24-hour format.
24 hour
Toner Save ON Use to set the machine to use less
toner and print lower quality output.
OFF
Discard Size
z When receiving a
document as long as or
longer than the paper in
the machine, the fax
machine can be set to
discard any excess at the
bottom of the page.
[00 - 30] If the Fax Setup option Auto
Reduction is turned OFF or fails,
and the received document is as
long or longer than the paper
selected, the machine will discard
any excess image at the bottom of
the page.
If the received page is outside the
discard margin set, it will print on
two sheets of paper at the actual
size.
Margins can be set between 0 -
30mm (1.2")
OPTION SETTINGS DESCRIPTION