ZyXEL Communications NWA-3160 Series - Manual (Page 79)

Chapter 5 System Screens
ZyXEL NWA-3160 Series User’s Guide
79
Figure 43 SYSTEM > Password.
The following table describes the labels in this screen.
Table 12 Password
LABEL DESCRIPTIONS
Enable Admin at Local Select this check box to have the device authenticate management logins to
the device.
Use old setting Select this to have the ZyXEL Device use the local management password
already configured on the device (“1234” is the default).
Use new setting Select this if you want to change the local management password.
Old Password Type in your existing system password (“1234” is the default password).
New Password Type your new system password (up to 31 characters). Note that as you type
a password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Retype your new system password for confirmation.
Enable Admin on
RADIUS
Select this (and configure the other fields in this section) to have a RADIUS
server authenticate management logins to the ZyXEL Device.
Use old setting Select this to have a RADIUS server authenticate management logins to the
ZyXEL Device using the RADIUS username and password already configured
on the device.
Use new setting Select this if you want to change the RADIUS username and password the
ZyXEL Device uses to authenticate management logon.
User Name Enter the username for this user account. This name can be up to 31 ASCII
characters long, including spaces.
Password Type a password (up to 31 ASCII characters) for this user profile. Note that as
you type a password, the screen displays a (*) for each character you type.
Spaces are allowed.
Note: If you are using PEAP authentication, this password
field is limited to 14 ASCII characters in length.