ZyXEL Communications NWA-3160 Series - Manual (Page 215)

ZyXEL NWA-3160 Series User’s Guide
215
C
H A P T E R
19
General Setup
The chapter shows you the information on general setup.
19.1 General Setup
Menu 1 – General Setup contains administrative and system-related information (shown
next). The System Name field is for identification purposes.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. While you
must enter the host name (System Name) on each individual computer, the domain name can
be assigned from the ZyXEL Device via DHCP.
19.1.1 Procedure To Configure Menu 1
Enter “1” in the Main Menu to open Menu 1 – General Setup as shown next.
Figure 148 Menu 1 General Setup
Fill in the required fields. Refer to the following table for more information about these fields.
Menu 1 - General Setup
System Name= NWA-Series
Domain Name=
First System DNS Server= None
IP Address= N/A
Second System DNS Server= None
IP Address= N/A
Third System DNS Server= None
IP Address= N/A
Table 82 Menu 1 General Setup
FIELD DESCRIPTION
System Name Choose a descriptive name for identification purposes. This name can be up
to 30 alphanumeric characters long. Spaces are not allowed, but dashes “-”
and underscores "_" are accepted.
Domain Name This is not a required field. Leave this field blank or enter the domain name
here if you know it.
First/Second/Third
System DNS Server
Press [SPACE BAR] to select From DHCP, User Defined or None and press
[ENTER].
These fields are not available on all models.