ZyXEL Communications NWA-3160 Series - Manual (Page 152)

Chapter 13 Internal RADIUS Server
ZyXEL NWA-3160 Series User’s Guide
152
"
The internal RADIUS server does not support domain accounts (DOMAIN/user).
When you configure your Windows XP SP2
Wireless Zero Configuration PEAP/
MS-CHAPv2 settings, deselect the Use Windows logon name and password
check box. When authentication begins, a pop-up dialog box requests you to
type a Name, Password and Domain of the RADIUS server. Specify a name and
password only, do not specify a domain.
Click AUTH. SERVER > Setting. The screen appears as shown.
Figure 91 Internal RADIUS Server Setting Screen
The following table describes the labels in this screen.
Table 54 Internal RADIUS Server Setting Screen Setting
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device use its internal RADIUS
server to authenticate wireless clients or other APs.
Index This field displays the certificate index number. The certificates are listed in
alphabetical order. Use the CERTIFICATES screens to manage certificates. The
internal RADIUS server uses one of the certificates listed in this screen to
authenticate each wireless client. The exact certificate used depends on the
certificate information configured on the wireless client.
Name This field displays the name used to identify this certificate. It is recommended that
you give each certificate a unique name.
auto_generated_self_signed_cert is the factory default certificate common to all
ZyXEL Devices that use certificates.
Note: It is recommended that you replace the factory default
certificate with one that uses your ZyXEL Device's MAC
address. Do this when you first log in to the ZyXEL
Device or in the CERTIFICATES > My Certificates screen.