ZyXEL Communications NWA-3160 Series - Manual (Page 200)

Chapter 17 Maintenance
ZyXEL NWA-3160 Series User’s Guide
200
17.2.1 System Statistics
Click Maintenance > Show Statistics. Read-only information here includes port status,
packet specific statistics and bridge link status. Also provided are "system up time" and "poll
interval(s)". The Poll Interval field is configurable. The fields in this screen vary according to
the current wireless mode.
Figure 130 System Status: Show Statistics
The following table describes the labels in this screen.
17.3 Association List
View the wireless stations that are currently associated with the ZyXEL Device in the
Association List screen.
Click MAINTENANCE > Association List to display the screen as shown next.
Table 74 System Status: Show Statistics
LABEL DESCRIPTION
Port This is the Ethernet port (LAN) or wireless LAN.
Status This shows the port speed and duplex setting if you are using Ethernet
encapsulation for the Ethernet port. Ethernet port connections can be in half-
duplex or full-duplex mode. Full-duplex refers to a device's ability to send and
receive simultaneously, while half-duplex indicates that traffic can flow in only
one direction at a time. The Ethernet port must use the same speed or duplex
mode setting as the peer Ethernet port in order to connect.
This shows the transmission speed only for the wireless adaptors.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This shows the transmission speed in bytes per second on this port.
Rx B/s This shows the reception speed in bytes per second on this port.
Up Time This is total amount of time the line has been up.
Poll Interval(s) Enter the time interval for refreshing statistics.
Set Interval Click this button to apply the new poll interval you entered above.
Stop Click this button to stop refreshing statistics.