3 configuring rogue ap detection, 1 rogue ap: configuration, Figure 81 “honeypot” attack – ZyXEL Communications NWA-3160 Series User Manual
Page 137
Chapter 11 Rogue AP
ZyXEL NWA-3160 Series User’s Guide
137
Figure 81 “Honeypot” Attack
11.3 Configuring Rogue AP Detection
You can configure the ZyXEL Device to detect rogue IEEE 802.11a (5 GHz - NWA-3160
only) and IEEE 802.11b/g (2.4 GHz) APs.
If you have more than one AP in your wireless network, you must also configure the list of
“friendly” APs. Friendly APs are the other wireless access points in your network, as well as
any others that you know are not a threat (those from neighboring networks, for example). It is
recommended that you export (save) your list of friendly APs often, especially if you have a
network with a large number of access points.
You can choose to scan for rogue APs manually, or to have the ZyXEL Device scan
automatically at pre-defined intervals.
You can also set the ZyXEL Device to email you immediately when a rogue AP is detected
(see
for information on how to set up email logs).
11.3.1 Rogue AP: Configuration
Click ROGUE AP > Configuration. The following screen appears.