beautypg.com

Snmp configuration, 1 snmp configuration, Chapter 21 snmp configuration – ZyXEL Communications NWA-3160 Series User Manual

Page 219: Figure 151 menu 22 snmp configuration, Table 84 menu 22 snmp configuration, Snmp configuration (219)

background image

ZyXEL NWA-3160 Series User’s Guide

219

C

H A P T E R

21

SNMP Configuration

This chapter explains SNMP Configuration menu 22. See the web configurator chapter on
SNMP for background information.

21.1 SNMP Configuration

To configure SNMP, select option 22 from the main menu to open Menu 22 – SNMP
Configuration
as shown next. The “community” for Get, Set and Trap fields is SNMP
terminology for password.

Figure 151 Menu 22 SNMP Configuration

The following table describes the SNMP configuration parameters.

Menu 22 - SNMP Configuration

SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Table 84 Menu 22 SNMP Configuration

FIELD

DESCRIPTION

SNMP:

Get Community

Type the Get Community, which is the password for the incoming Get- and

GetNext requests from the management station.

Set Community

Type the Set Community, which is the password for incoming Set requests from

the management station.

Trusted Host

If you enter a trusted host, your ZyXEL Device will only respond to SNMP

messages from this address. A blank (default) field means your ZyXEL Device will

respond to all SNMP messages it receives, regardless of source.

Trap:

Community

Type the trap community, which is the password sent with each trap to the SNMP

manager.