beautypg.com

2 backup configuration, 1 using the ftp command from the dos prompt, Table 88 filename conventions – ZyXEL Communications NWA-3160 Series User Manual

Page 230

background image

Chapter 24 Firmware and Configuration File Maintenance

ZyXEL NWA-3160 Series User’s Guide

230

The following table is a summary. Please note that the internal filename refers to the filename
on the ZyXEL Device and the external filename refers to the filename not on the ZyXEL
Device, that is, on your computer, local network or FTP site and so the name (but not the
extension) will vary. After uploading new firmware see the ZyNOS F/W Version field in
Menu 24.2.1 – System Maintenance – Information
to confirm that you have uploaded the
correct firmware version.

24.2 Backup Configuration

Backup is highly recommended once your ZyXEL Device is functioning properly. FTP is the
preferred method, although TFTP can also be used.
Please note that the terms “download” and “upload” are relative to the computer. Download
means to transfer from the ZyXEL Device to the computer, while upload means from your
computer to the ZyXEL Device.

24.2.1 Using the FTP command from the DOS Prompt

1 Launch the FTP client on your computer.
2 Enter “open” and the IP address of your ZyXEL Device.
3 Press [ENTER] when prompted for a username.
4 Enter “root” and your SMT password as requested. The default is 1234.
5 Enter “bin” to set transfer mode to binary.
6 Use “get” to transfer files from the ZyXEL Device to the computer, for example, “get

rom-0 config.rom” transfers the configuration file on the ZyXEL Device to your
computer and renames it “config.rom”. See earlier in this chapter for more information
on filename conventions.

7 Enter “quit” to exit the FTP prompt.

Table 88 Filename Conventions

FILE TYPE

INTERNAL

NAME

EXTERNAL

NAME

DESCRIPTION

Configuration File Rom-0

*.rom

This is the configuration filename on the ZyXEL

Device. Uploading the rom-0 file replaces the entire

ROM file system, including your ZyXEL Device

configurations, system-related data (including the

default password), the error log and the trace log.

Firmware

Ras

*.bin

This is the generic name for the ZyNOS firmware

on the ZyXEL Device.