ZyXEL Communications NWA-3160 Series - Manual (Page 180)

Chapter 15 Log Screens
ZyXEL NWA-3160 Series User’s Guide
180
15.4.2 Displaying Logs
Use the sys logs display command to show all of the logs in the ZyXEL Device’s log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyXEL
Device log category.
Use the sys logs clear command to erase all of the ZyXEL Device’s logs.
15.5 Log Command Example
This example shows how to set the ZyXEL Device to record the error logs and alerts and then
view the results.
ras> sys logs load
ras> sys logs category error 3
ras> sys logs save
ras> sys logs display access
#. time source destination notes message
0 | 11/11/2002 15:10:12 | 172.22.3.80:137 | 172.22.255.255:137 | ACCESS BLOCK