ZyXEL Communications NWA-3160 Series - Manual (Page 125)

Chapter 9 Other Wireless Configuration
ZyXEL NWA-3160 Series User’s Guide
125
Figure 70 WIRELESS > Layer 2 Isolation
The following table describes the labels in this screen.
9.3 Configuring Layer-2 Isolation
To configure layer-2 isolation, click WIRELESS > Layer-2 Isolation > Edit. The screen
appears as shown.
"
If layer-2 isolation is enabled, you need to know the MAC address of each
wireless client, AP, computer or router that you want to allow to communicate
with the ZyXEL Device's wireless clients.
Table 38 WIRELESS > Layer-2 Isolation
LABEL DESCRIPTION
Index This is the index number of the profile.
Profile Name This field displays the name given to a layer-2 isolation profile in the Layer-2
Isolation Configuration screen.
Edit Select an entry from the list and click Edit to configure settings for that profile.