Figure 68 configuring ssid, Table 37 configuring ssid – ZyXEL Communications NWA-3160 Series User Manual
Page 120
Chapter 8 MBSSID and SSID
ZyXEL NWA-3160 Series User’s Guide
120
• WIRELESS > Security (one of the security profiles).
• WIRELESS > RADIUS (one of the RADIUS profiles).
• WIRELESS > MAC Filter (the MAC filter list, if activated in the SSID profile).
• WIRELESS > Layer 2 Isolation (the layer 2 isolation list, if activated in the SSID
profile).
• Also, use the VLAN screen to set up wireless VLANs based on SSID.
Configure the fields in the above screens to use the settings in an SSID profile.
Select an SSID profile in the WIRELESS > SSID screen and click Edit to display the
following screen.
Figure 68 Configuring SSID
The following table describes the labels in this screen.
Table 37 Configuring SSID
LABEL
DESCRIPTION
Profile Name
Enter a name identifying this profile.
SSID
When a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Hide Name (SSID)
Select Disable if you want the ZyXEL Device to broadcast this SSID (a
wireless client scanning for an AP will find this SSID). Alternatively, select
Enable to have the ZyXEL Device hide this SSID (a wireless client scanning
for an AP will not find this SSID).
Security
Select a security profile to use with this SSID profile. See
for more information.
RADIUS
Select a RADIUS profile from the drop-down list box, if you have a RADIUS
server configured. If you do not need to use RADIUS authentication, ignore
this field. See
for more information.