ZyXEL Communications NWA-3160 Series - Manual (Page 138)

Chapter 11 Rogue AP
ZyXEL NWA-3160 Series User’s Guide
138
Figure 82 ROGUE AP > Configuration
The following table describes the labels in this screen.
11.3.2 Rogue AP: Friendly AP
The friendly AP list displays details of all the access points in your area that you know are not
a threat. If you have more than one AP in your network, you need to configure this list to
include your other APs. If your wireless network overlaps with that of a neighbor (for
example) you should also add these APs to the list, as they do not compromise your own
network’s security. If you do not add them to the friendly AP list, these access points will
appear in the Rogue AP list each time the ZyXEL Device scans.
Table 44 ROGUE AP > Configuration
LABEL DESCRIPTION
Enable Rogue AP
Period Detection
Select Yes to turn rogue AP detection on. You must also enter a time value
in the Period field.
Select No to turn rogue AP detection off.
Period (minutes) Enter the period you want the ZyXEL Device to wait between scanning for
rogue APs (between 10 and 60 minutes). You must also select Yes in the
Active Rogue AP Period Detection field.
Friendly AP List
Export Click this button to save the current list of friendly APs’ MAC addresses and
descriptions (as displayed in the ROGUE AP > Friendly AP screen) to your
computer.
File Path Enter the location of a previously-saved friendly AP list to upload to the
ZyXEL Device. Alternatively, click the Browse button to locate a list.
Browse Click this button to locate a previously-saved list of friendly APs to upload to
the ZyXEL Device.
Import Click this button to upload the previously-saved list of friendly APs displayed
in the File Path field to the ZyXEL Device.
Apply Click Apply to save your settings.
Reset Click Reset to return all fields in this screen to their previously-saved
values.