Xerox COLORQUBE 8870 - Manual (Page 37)

Installation and Setup
ColorQube 8570/8870 Color Printer
User Guide
37
Manually Assigning an IPv6 Address
A manually entered IPv6 address is used in addition to any other IPv6 addresses. To create a manual
address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS.
To manually set the IPv6 address, use one of the following options:
•
The printer control panel
• CentreWare IS
Setting the IPv6 Address Using the Control Panel
1.
On the printer control panel, select Printer Setup and then press the OK button.
2. Select Connection Setup > OK.
3. Select Network Setup > OK.
4. Select TCP/IPv6 Setup > OK.
5. Select Manual Address and then press OK to turn manual addressing on.
6. Press the Down Arrow button to select Manual Address: :: and then press OK.
7. To set the address:
a.
Use the Up Arrow and Down Arrow buttons to set the first number, then press OK to set the
number.
b. Continue setting individual numbers, pressing OK after setting each one. When you get to
the end of the address, press OK to return to the menu.
Setting the IPv6 Address Using CentreWare IS
1.
Launch your computer’s Web browser.
2. Type your printer’s IP address in the browser’s Address field.
3. At the CentreWare IS page, click Properties.
4. In the navigation pane on the left, expand the Protocols folder, then click TCP/IP.
5. Click the TCP/IP (v6) button.
6. In the Manual Address Assignment field, select the Use this address check box and then type the
address in the field provided.
7. At the bottom of the page, click the Save Changes button.