Disabling jet substitution mode – Xerox COLORQUBE 8870 User Manual

Page 174

Troubleshooting

ColorQube 8570/8870 Color Printer
User Guide

174

Select the number of the weak or missing jet (1 to 309) and then press OK to confirm the
selection.

Note:

If you need to substitute more jets, select Save Change and Select Another Jet and repeat

steps 6 and 7.

Select Save Change and Exit > OK to complete the procedure.

Disabling Jet Substitution Mode

On the printer control panel, select Troubleshooting and then press the OK button.

Select Print Quality Problems > OK.

Select Eliminate Light Stripes > OK.

Select Jet Substitution Mode > OK.

Select Turn Jet Substitution Mode Off > OK.

Note:

Any saved and stored jobs on the printer’s hard drive, if the hard drive option is present and

enabled, must be resubmitted to print correctly while Jet Substitution is enabled.