Xerox COLORQUBE 8870 User Manual
Page 167
Troubleshooting
ColorQube 8570/8870 Color Printer
User Guide
167
4.
Select the desired type of color correction.
Note:
For an explanation of each color correction type, print the Troubleshooting Print-Quality
page and refer to the Color Adjustments section. For details, see
Printing the Troubleshooting Print
on page 164. You can also view a description of each correction type at the control
panel by pressing the Help (?) button on the control panel while in the Color Correction menu.
5.
Press OK.
See also:
Using Color Sampler Pages
The color sampler pages are designed to help you select colors to use in your print jobs. Each sampler
page lists either the percentages of ink used (CMYK), or the amounts (from 0 to 255) of red, green, and
blue that are used. Most application software allows you to select colors by setting the RGB, CMYK, and
PANTONE values. The Sampler Pages help you set or match specific colors by showing what colors you
get for different color values. This is useful for matching specific colors, hues, and gradients for graphic
arts and office applications.
Notes:
•
Since pages can be color corrected, be sure that the color correction setting used for
printing the color sampler pages is the same as the color correction setting selected in
the printer driver. Driver settings much match the setting set on the printer control panel
in order to match the target color.
•
Before printing the sampler pages, select the appropriate default print-quality mode and
color correction from the Printer Setup menu on the control panel. Color correction for
Sampler pages can also be set in CentreWare IS. For details, see the CentreWare IS
online help.
•
The color sampler pages are for use with the PostScript driver only.
To print color sampler pages from the printer control panel:
1.
Select the default print-quality mode and color correction you are trying to match for the
PostScript driver. For details, see
Selecting a Print-Quality Mode
2.
Select Information and then press the OK button.
3.
Select Sample Pages > OK.
4.
Select the desired color sampler page and then press OK.
Note:
Each color sampler page prints a multiple-page chart. To stop printing before all pages of a
chart are printed, press the Cancel button on the control panel.
See also: