Xerox COLORQUBE 8870 - Manual (Page 141)

Maintenance
ColorQube 8570/8870 Color Printer
User Guide
141
Turning Off the Printer
1. Press the power switch located behind I/O door E on the rear right side of the printer to turn it off.
2. Within 10 seconds after turning off the printer, select Shutdown for Moving Printer on the
control panel.
3. Wait for the printer to complete the cool-down period for the ink to solidify. The printer shuts
down when it is cool enough to move.
4. Unplug the printer after the cool-down cycle is complete.
Note: Do not unplug the printer until the power-down and cooling sequence completes.
Packing the Printer
Repack the printer using the original packing material and boxes or a Xerox repackaging kit. Additional
instructions for repacking the printer are provided in the repackaging kit. If you do not have all the
original packaging, or are unable to repackage the printer, refer to the support website for information
on contacting the support call center or contact your local Xerox reseller.
CAUTION: Damage to the printer resulting from improper moving, or failure to repackage the
printer properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.
8X70-031