Far end camera control – pan, tilt and zoom, About far end camera control, Panning, tilting, and zooming the far end camera – TANDBERG 1700 MXP User Manual
Page 43
D 13954.01
JUNE 2006
3
TANDBERG 1700
MXP
USER GUIDE
Far End Camera Control – Pan, Tilt and Zoom
Video Meeting Features
About Far End Camera Control
This is a feature that lets you pan, tilt,
and zoom the far end camera. If far end
presets* are available you may access
these as well, and you may also make use
of any video sources that the far end may
have at its disposal.
This feature requires a movable camera in
the far end – i.e. communication between
two 1700
MXP
units will not provide far
end camera control.
This feature is not accessible in MultiSite
video meetings.
* Far End Presets are described on the following page.
During a video meeting, press
OK
to produce the menu and
navigate to the
Camera Control
icon.
Press
OK
to display the menu and navigate to the
Far End
tab.
Navigate to the
Camera Control
icon.
Press
OK
to enable
Far End Camera Control
. Observe the four
triangles indicating your control options.
Use the
Arrow
keys to pan and tilt the far end camera and
Zoom +
and
Zoom –
to zoom in and out.
Press
OK
to exit this mode and navigate to the
Back
icon and click
OK
to exit the
Camera Control
mode as such.
Panning, Tilting, and Zooming the Far End Camera