TANDBERG 1700 MXP - Manual (Page 129)

D 13954.01
MAY 2006 12
TANDBERG 1700 MXP
USER GUIDE
Restore Default Settings (I)
Control Panel > Restore Default Settings
LOST IN TRANSLATION? Click on the Phone
Book icon 5 times followed by pressing
the number key 1 on the remote control to
reset the menu language to English.
 Press OK to produce the below menu.
 Use the Arrow keys to move to the
Control Panel and press OK .
 Use the Arrow keys to move to Restore
Default Settings , if applicable. Press OK .

Whilst the Restore Defaults icon is
highlighted press OK to restore the
default setting. You will be prompted to
confirm your intentions.
SystemUnit Name: “”
SystemUnit InternationalName: “”
SystemUnit DisplayName: “”
OptionKey Features: “”
OptionKey Bandwidth: “”
SerialPort 1 BaudRate: 9600
SerialPort 1 Parity: None
SerialPort 1 DataBits: 8
SerialPort 1 StopBits: 1
SerialPort 1 Mode: Control
Ethernet 1 Speed: Auto
Ethernet 2 Speed: Auto
IPProtocol: IPv4
IP Assignment: DHCP
IP Address: “127.0.0.1”
IP V6 Address: “”
IP SubnetMask: “255.255.255.0”
IP Gateway: “127.0.0.1”
IP DNS Server 1 Address: “”
IP DNS Server 2 Address: “”
IP DNS Server 3 Address: “”
IP DNS Server 4 Address: “”
IP DNS Server 5 Address: “”
IP DNS Domain Name: “”
H323Gatekeeper Discovery: Auto
H323Gatekeeper Address: “”
H323Gatekeeper Authentication Mode: Off
H323Gatekeeper Authentication ID: “”
H323Gatekeeper MultipleAlias: Off
CallManager Address: “”
H323CallSetup Mode: Direct
H323Prefix: “”
NAT Mode: Off
NAT Address: “127.0.0.1”
IPMedia MaxVideoTXRate: 1920
RTP Ports: Dynamic
RTP MTU: 1300
QoS Precedence Telephony Audio: Auto
QoS Precedence Telephony Signalling: Auto
QoS Precedence VideoTelephony Audio: Auto
QoS Precedence VideoTelephony Signalling: Auto
QoS Precedence VideoTelephony Video: Auto
QoS Precedence VideoTelephony Data: Auto
QoS Diffserv Telephony Audio: 0
QoS Diffserv Telephony Signalling: 0
QoS Diffserv VideoTelephony Audio: 0
QoS Diffserv VideoTelephony Signalling: 0
QoS Diffserv VideoTelephony Video: 0
QoS Diffserv VideoTelephony Data: 0
QoS Mode: Precedence
QoS ToS: Off
QoS RSVP: Off
NetProfile 1 Name: “”
NetProfile 1 CallPrefix: “”
NetProfile 1 CallSuffix: “”
NetProfile 1 Network: Auto
NetProfile 2 Name: “”
NetProfile 2 CallPrefix: “”
NetProfile 2 CallSuffix: “”
NetProfile 2 Network: Auto
NetProfile 3 Name: “”
NetProfile 3 CallPrefix: “”
NetProfile 3 CallSuffix: “”
NetProfile 3 Network: Auto
NetProfile 4 Name: “”
NetProfile 4 CallPrefix: “”
NetProfile 4 CallSuffix: “”
NetProfile 4 Network: Auto
Continued overleaf...
RESTORING DEFAULT SETTINGS
The Default Settings