TANDBERG 1700 MXP - Manual (Page 120)

D 13954.01
MAY 2006 120
TANDBERG 1700 MXP
USER GUIDE
IP Services
Control Panel > Network Settings > LAN Settings
Touch tones Snapshot
Camera Presets
CANCEL
Select this icon and press OK
to leave the menu undoing any
changes.
RESTORE DEFAULTS
Select this icon and press OK
to restore the default settings.
SAVE & RESTART
Select this icon and press OK
to leave the menu restarting
the system to put IP Setting
changes into effect.
SAVE
Select this icon and press OK to leave
the menu saving the changes. Note
that restart is needed to put changes
into effect here!
NTP IP
This is the NTP time server address from which the system
can get updated time information. This is a requirement for
proper operation if H.235 authentication is implemented.
The Network Time Protocol (NTP) is used to synchronize the
time of the system to a reference time server. The NTP IP set-
ting holds the IP address to a time source where the system
can get the exact time. The time server will subsequently be
queried every 24th hour for time updates. The system will
use the time to timestamp messages transmitted to Gate-
keepers or Border Controllers requiring H.235 authentication.
It is also used for timestamping Placed Calls, Missed Calls
and Received Calls.
Touch tones Snapshot
Camera Presets