Tektronix Grass Valley 3000 - Manual (Page 98)

2-62
Section 2 — Startup & Configuration
Setting Beeper Preferences
You may wish to customize the beeper alert system. Beeper
preferences are selected on the Configuration/User Preferences/
Beeper Preferences Menu shown below.
BEEPER ON/OFF — Use to enable or disable the beeper
alert system.
WARNING — Use to enable or disable beeper warnings.
(For example: On the Keyer Copy Menu, if you try to copy
M/E 1 Key 1 to M/E 1 Key 1 (copy a key onto itself) you
will get a beep with Beeper Prefs selection: WARNING
ON.)
END OF KNOB — Enable or disable the beeper alert that
sounds when the knob is turned to either end of its’ range.
KNOB CENTER — Enable or disable the beeper alert that
sounds when the knob is turned to the center of its’ range.
INACTIVE KNOB — Enable or disable the beeper alert for
knobs “turned off” during the current switcher state.
OFF
WARNING
BEEPER
ON/OFF
END OF
KNOB
KNOB
CENTER
INACTIVE
KNOB
BEEPER PREFS MENU
config / user prefs / beeper prefs
OFF OFF OFF
ON ON ON ON ON
OFF