Tektronix Grass Valley 3000 - Manual (Page 73)

2-37
Configuring External Interfaces
The Aux Bus button selection made on the switcher control panel
is always a logical aux bus; however, unless Kaleidoscope is
connected, Logical Aux Bus 1 always corresponds to Physical Aux
Bus 1, etc. (The current mapping of physical-to-logical DPM
channels is displayed in the DPM Map Inputs Menu.)
It should be noted that the switcher supports only one pooled
device. In the example in
Figure 2-3 , Physical Aux Bus 1 is
connected to Kaleidoscope Physical Channel A, Bus 2 to
Channel B, and so on.
Kaleidoscope
Logical Channels
Kaleidoscope
Channel Pool
Switcher
Output
Routing
Phys Aux 2
Phys Aux 1
Phys Aux 3
Phys Aux 4
Phys Aux 5
Switcher
Input
Routing
Kaleidoscope
Physical
Channels
Logical Aux 1
Logical Aux 7
Logical Aux 4
Logical Aux 6
Logical Aux 5
Logical Aux 3
Logical Aux 2
A
C
E
B
D
Model 3000
Logical
Channel
2
Logical
Channel
5
Logical
Channel
4
Logical
Channel
3
Logical
Channel
1
0347-02-29
E D C B A
Figure 2-3. Example of Connections for a Pooled DPM