Tektronix Grass Valley 3000 User Manual
Page 67
2-31
Configuring Outputs
2.
Use the
GROUP SELECT
and
CARD SELECT
buttons to select
the appropriate outputs.
Note that as the output boards are selected with
CARD
SELECT
, the names of the outputs change above the soft
buttons.
3.
Set the resolution to either
8-BIT
or
10-BIT
for each of the four
selected digital outputs.
4.
Repeat steps 2 and 3 until all digital outputs have been
configured.
NOTE:
Dithering of the 8-bit outputs is selectable in the Misc/Signal
Process Menu.
5.
Press the main menu
CONFG
button to return to the
Configuration Menu.