Tektronix Grass Valley 3000 - Manual (Page 61)

2-25
Configuring Inputs
AUTO TRANS — Enables selection of the Auto Transition GPI
function. The following transitions may be triggered with GPI
pulses:
M/E 1 , M/E 2 , M/E 3 , F-F , and F-F PST BLK
CUT — Enables selection of the Cut GPI function. The
following cuts may be triggered by the GPI:
M/E 1 , M/E 2 , M/E 3 , and F-F
E-MEM — Enables selection of the E-MEM GPI function. The
following E-MEM functions may be triggered by the GPI:
RECALL M/E 1 , RECALL M/E 2 , RECALL M/E 3 , RECALL
MSTR , AUTO RECALL , EFX DISSOLV , and SEQUENCE . The
REGISTER soft knob selects the register for E-MEM
recalls.
FRAME STORE — Enables selection of the Frame Store GPI
function. Triggered functions are as follows:
VIDEO GRAB , KEY GRAB , and MASK GRAB