Setting input digital resolution, Input digital resolution menu – Tektronix Grass Valley 3000 User Manual
Page 52
2-16
Section 2 — Startup & Configuration
Setting Input Digital Resolution
1.
From the Inputs Menu, select
DIGITAL RES>
to display the
Input Digital Resolution Menu.
2.
To set the digital resolution of a particular input, select the
group of input cards with the
GROUP SELECT
button. In the
example above, Input Module 14 (representing inputs 53
through 56) is selected.
Press the
CARD SELECT
button to select the desired input
module within the group previously selected. Note that the
analog input modules and any input module slots that have
“no board” are skipped as the
CARD SELECT
button is
pressed.
3.
Set the input digital resolution to either
8-BIT
or
10-BIT
for
each of the four selected digital inputs.
4.
Repeat steps 2 through 4 until all digital inputs have been
configured.
5.
Press the
EXIT
button to return to the Inputs Menu.
INPUT DIGITAL RESOLUTION MENU
1 TO 8
config / inputs / digital res
CARD
SELECT
GROUP
SELECT
INPUT
53
INPUT
55
INPUT
54
INPUT
56
C 14
9 TO 16
SERIAL
ANALOG
ANALOG
SERIAL
PARALLEL
NO BOARD
SERIAL
10 BITS
-
-
10 BITS
8 BITS
-
10 BITS
8 BITS
-
-
8 BITS
10 BITS
-
10 BITS
10 BITS
-
-
10 BITS
10 BITS
-
10 BITS
10 BITS
-
-
8 BITS
8 BITS
-
8 BITS
C9 33-36
C10 37-40
C11 41-44
C12 45-48
C13 49-52
C15 57-60
C16 61-64
SERIAL
10 BITS
8 BITS
8 BITS
10 BITS
C14 53-56
10 BITS
8 BITS
8 BITS
10 BITS
10 BITS
10 BITS
8 BITS
8 BITS