Toshiba G8000 - Manual (Page 77)

69 G8000 Series Installation and operation Manual
15.6 Restoring UPS Operation
The procedure to restore UpS operation is shown in Steps 1-2. The example shows the UpS restored
after a trip fault occurred on inverter over current with the message “InV. oC.”
STEP 1
Check the lCD screen.
Also check other fault data screens with
scroll buttons graphic panel.
STEP 2
Contact Toshiba Customer Support and
follow the directions given by the service
personnel.
WARNING
Contact Toshiba in the event of malfunction or fault.
This UpS should be repaired only by factory authorized personnel.
Servicing by untrained personnel may extend the fault or result in
electric shock or personal injury.
Do NOT attempt to modify or relocate the UPS.
electric shock, personal injury or fault may result if unauthorized
personnel attempt to modify or relocate the UpS. be sure to contact
toshiba customer service if you need to modify or relocate the UpS.
Do not open the front and/or rear panels.
The parts inside carry energy-high current. Touching them may result
in electric shock, burns or fault.
CONVERTER INVERTER
UPS
AC OUTPUT BATTERIES
BYPASS INPUT
DISCHARGE
EQUAL CHARGE
FLOAT CHARGE
BYPASS
AC INPUT
AC
SWITCH
BYPASS
1 INV. OC
07-15-07 08:05:30
↓ ANOTHER ITEM
LED Key
- LED Off
- LED On