Toshiba G8000 - Manual (Page 58)

50 G8000 Series Installation and operation Manual
13.4 Normal Display
The normal Display screen indicates the UpS operational status and provides various screens: an
operation guidance screens, mode screens and measured data screens. Table 13.2 shows these screens
page by page and illustrates the UpS normal Display operational status screens.
TABLE 13.2 - NORMAL DISPLAY SCREEN EXAMPLES
OPERATIONAL STATUS SCREENS
BYPASS Shows the UpS status at the top and guidance
message or measured data underneath.
Shows a guidance message at start up. PRESS ‘RUN’ SWITCH
UPS SUPPLY Shows the output voltage and current after start up.
AC-VO 480[V]
AC- I O 50[%]
OPERATION MODE Shows the UpS operation mode.
NORMAL OPERATION MODE
SYNC.
MEASUREMENT SCREENS
O/P VOLTAGE output Voltage: Shows the output line-to-line
output voltage.
VOLT. 480[V]
FREQ. 60.0[Hz]
O/P CURRENT (R.M.S.) output Current: Shows the rMS output current
(%) for each phase..
U 50[%]
V 50[%]
W 50[%]