Toshiba G8000 - Manual (Page 66)

58 G8000 Series Installation and operation Manual
CONVERTER INVERTER
UPS
AC OUTPUT BATTERIES
BYPASS INPUT
DISCHARGE
EQUAL CHARGE
FLOAT CHARGE
BYPASS
AC INPUT
AC
SWITCH
UPS SUPPLY
AC - Vo 480 v
AC - Io 50%
14.4 Switch Power Supply (UPS→Bypass)
The procedure to transfer between the UpS supply and the bypass supply is shown in Steps 1-3
STEP 1
Check AC InpUT leD and bypASS
leD are on to make sure power is being
delivered to the UpS.
STEP 2
press the “bypASS” button for at least 0.5
seconds.
UpS leD is “oFF”.
bypASS leD is “on”.
STEP 3
please wait until procedure is completed.
NOTE
To change from bypass to UpS supply,
follow the Startup Procedures - STEP 5.
If the AC switch does not function, contact
Toshiba or authorized representatives.
CONVERTER INVERTER
UPS
AC OUTPUT BATTERIES
BYPASS INPUT
DISCHARGE
EQUAL CHARGE
FLOAT CHARGE
BYPASS
AC INPUT
AC
SWITCH
BYPASS
CONVERTER INVERTER
UPS
AC OUTPUT BATTERIES
BYPASS INPUT
DISCHARGE
EQUAL CHARGE
FLOAT CHARGE
BYPASS
AC INPUT
AC
SWITCH
BYPASS
AC - Vo 480 V
AC - Io 50%
PRESS ‘UPS’ SWITCH
LED Key
- LED Off
- LED On
- LED Flash