Overland Storage REO 9000 User Manual
Page 75
Creating Tape Devices
W
75
Setup Guide
2
From the REO Device ID list, select the first device whose configuration
you want to change.
3
In the Device Type section, select Tape.
4
If you want to maximize backup storage capacity, select the Enable
Tape Compression check box (for optimal backup performance, leave
the check box cleared).
5
To change the default target name of a device, in the iSCSI Target
Name box, type the new name (for example, LTO7).
Important:
The target names must be unique within a network. If you
are using multiple appliances, you must change the default target
names. For more information, see
6
To save your changes, click Submit (or click Reset to cancel).
Select a device.
Type a new name (if
desired), and then
click Submit.