Overland Storage REO 9000 - Manual (Page 57)

Entering the System Information W 57
Setup Guide
Entering the System Information
1 In the left pane, under System Menu, click System Configuration.
2 In the System Information section of the right pane, enter the
following:
„ Workgroup/Domain Name. Enter the workgroup or domain name
assigned by your network administrator.
„ REO Name. Enter up to 16 characters to name the REO Appliance.
You can use letters or a mixture of letters and numbers, and you can
also use hyphens (-). Overland Storage recommends that you change
this name (the default is REO), especially if you use multiple REO
Appliances in your network.
„ REO Description. Enter up to 20 alphabetical or numerical
characters (or a combination of the two) to describe the appliance.
3 Click Apply.
4 Continue the configuration process by entering the logon information
described in the next section.
Click System Configuration.
Change these entries,
especially if you use
multiple appliances.